Beli hand reamer spiral di monotaro.id
%20Individual%20Steel%20Pin%20Gauge%20AA-4B/i1P101502649-3.jpg)
%20Individual%20Steel%20Pin%20Gauge%20AA/foP101502564-5.jpg)
/8qP111191314-1.jpg)
Kami Menampilkan Rekomendasi Kami Untuk Anda! Anda Bisa Membelinya Kapan Saja di monotaro.id
- SOMTA Parallel Hand Reameratribut:
- Material: High speed steel
- TRUSCO Hand ReamerDeskripsi:- Has loose chamfer angles and a shank rectangle part, and precisely finishes the hole after passing the drill hole and the rough reamer.
- Niigata Seiki (SK) Individual Steel Pin Gauge AA-4Batribut:
- Hardness: HV 650 or more
- Cylindricity (µm): 0,5
- Length (mm): 50
- Tolerance (µm): ± 0,8
-
-
- Okazaki Seiko Spiral Blade Chucking ReamerDeskripsi:Type with short blade length. Straight shank. MCO material (cobalt high speed steel) is used. Left twisted degree 20°, eclipse angle 45°.atribut:
- Blade Diameter Tolerance: m5
- Shank: Straight shank
- Sherwood Parallel Hand ReamerDeskripsi:Metric. Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B. METRIC TOLERANCES: Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008. Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009. Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.atribut:
- Flute Type: Left Hand Spiral
- Material: High Speed Steel
- Shank type: Straight
- Cutting Direction: Right Hand
- Reamer Type: Fixed
- Standards Met: BS 328-4, DIN 206B
- Sherwood Hand Taper Pin ReamerDeskripsi:Metric. Used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 1990 and DIN 9A. METRIC TOLERANCES: Diameter: Over 1.50 ~ up to 5.00. Tolerance: +0.075, -0.000. Diameter: Over 5.00 ~ up to 20.00. Tolerance: +0.125, -0.000.
-
-
-
- F.P.Tools Adjustable ReamerDeskripsi:The blade diameter is adjustable.atribut:
- Material: SKS
- ROHS Directive (Corresponding to 10 Substances): Correspondence
- Okazaki Seiko Spiral hand reamer SPHR seriesDeskripsi:Made of MCO material. Spiral hand reamer suitable for finishing holes in cast iron and steel in general.
- SOMTA Hand Tapper Pin Reamer Straight Fluteatribut:
- Material: High speed steel
- Type: Straigth Flute
- Niigata Seiki (SK) Individual Steel Pin Gauge AAatribut:
- Tolerance (µm): ± 0,8
- Cylindricity (µm): 0,5
- Hardness: HV 720 or more
- Okazaki Seiko Tapered Pin ReamerDeskripsi:MCO material is used.atribut:
- Material: MCO (cobalt high speed steel)
- Taper: 1/50
-
- Tungaloy External & Internal Turning Insert TPMT-PMDeskripsi:Positive 11degrees relief angle, M class, triangular insert, for medium cutting.atribut:
- Min D.O.C.: 1
- Max D.O.C.: 3
- Min. Turning Feed: 0.15
- Max. Turning Feed: 0.30
- Okazaki Seiko Short reamer with carbide end blade (percentage)Deskripsi:Solid type Carbide end blade reamer (CERM) short typeatribut:
- Blade Shape: Spiral
- Chamfer Length (mm): a：0.3
- Coating: Non-coated
- Handle Diameter (mm): Pattern diameter: 12
- Material: Carbide
- Number of Tips: 4
- Overall Length L (mm): 75
- Shank: Straight shank
- Underneck Length l2 (mm): 35
Daftar Harga hand reamer spiral Terbaru January 2026
| EIKO Spiral Hand Reamer | Rp759.900 |
| SOMTA Parallel Hand Reamer | Rp129.900 |
| TRUSCO Hand Reamer | Rp309.900 |
| Niigata Seiki (SK) Individual Steel Pin Gauge AA-4B | Rp81.000 |
| NACHI Hand Reamers | Rp499.900 |
| EIKO Hand Reamers | Rp739.900 |
| Okazaki Seiko Spiral Blade Chucking Reamer | Rp359.900 |
| Sherwood Parallel Hand Reamer | Rp509.900 |
| Sherwood Hand Taper Pin Reamer | Rp769.900 |
| EIKO Taper Pin Reamers | Rp1.099.900 |
Data diperbarui pada 29/01/2026 (Harga belum termasuk PPN)
Buka WhatsApp